Abstract
Wireless power transmission technology is used to transmit energy without contact in the field of electric vehicles, consumer electronics, and other industries. Among them, there are some applications with very low coupling coefficient where multilayer coil needs to be wound. Influenced by the parasitic capacitor between layers, the loss of the multilayer coil increases. The improved coil winding method and compensation method are proposed in this letter. Winding coils following the same sequence from outside to inside in each layer and connecting capacitors in series between layers of the coil can significantly reduce the voltage of the layers’ parasitic capacitor, which will decrease the coil loss. Compared with traditional method, the improved method increases the system efficiency at heavy load and light load by 0.74% and 2.48%, respectively. A 1-kW prototype was built with the maximum efficiency of 93.58%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.