Improved thin film stability of differently formulated, printed, and crosslinked polymer layers against successive solvent printing

Abstract

ABSTRACTInterface control remains a top challenge of solution‐processed organic light emitting diodes (OLED) stacks since the device performance heavily relies on it. Film stability of an inkjet deposited and crosslinked layer against subsequent exposure to a suitable inkjet printed solvent has been investigated. Impact of processing solvent (solvent used to prepare the polymer layer) on solution‐cast thin film properties has already been shown for polymer films. To our knowledge, this study is the first one analyzing thin films stability against solvent exposure using technology relevant materials processed via inkjet printing (IJP). The outcome of this research showed that the stability of the crosslinked films is affected by the solvent used for ink formulation. These findings are of great interest for multilayered semiconductors devices, such as OLEDs, field‐effect transistors and dye‐sensitized solar cells. Differential scanning calorimetry (DSC) was used to quantify the efficiency of the polymer crosslinking reaction in pure powder and in thin films, as processed from different solvents. Crosslinking efficiency measured by DSC correlated well with the deformation induced by the solvent and observed on layer surfaces. The interaction in solution between polymer and solvent has also been evaluated to explain its impact on thin film stability against successive solvent printing. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48895.