Abstract
The thermal stability of cellulose nanofibrils (CNFs) can be improved by converting cellulose crystalline structure to cellulose II using an alkaline treatment method. The conventional method requires around 20wt.% NaOH solutions and causes the cellulose interdigitation and aggregation, making CNFs production difficult. The objective of this study is to develop a new pretreatment method using a low-concentration alkaline solution to produce well-dispersed CNFs with improved thermal stability. CNFs with 90nm diameter were successfully prepared by treating cellulose powder with 2wt.% NaOH solution below 0°C, followed by homogenization through a French pressure cell press. The CNFs had relatively high thermal stability with the mean onset and maximum thermal decomposition temperature of 305°C and 343°C, respectively, compared with the CNFs prepared without the NaOH pretreatment (283°C and 310°C). The increased thermal stability can create new opportunities for the development of CNF-based bio-composites and electronics.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
