Improved State-Space Approach Based on Lumped Mass Matrix for Transient Analysis of Large-Scale Locally Nonlinear Structures

Abstract

Due to the assumption of acceleration variation in traditional step-by-step integration methods such as Newmark, sufficiently small time steps are required to ensure numerical stability and accuracy in dynamic systems. In contrast, the state-space approach, based on piecewise interpolation of discrete load functions, does not rely on predetermined acceleration assumptions and has demonstrated high efficiency in terms of stability and accuracy. The original state-space method requires the calculation of the inverse of the structural mass in the transition matrix. However, when a lumped mass matrix is used, this computation renders the entire mass matrix singular, resulting in an invalid solution expression. To address this issue, this study proposes an improved state-space approach for the transient analysis of large-scale structural systems with local nonlinearities. In this approach, a nonlinear force corrector is introduced as an external force term applied to the linear elastic system to account for the nonlinear behavior of locally yielding components. Consequently, the original nonlinear dynamic system can be transformed into an equivalent linear elastic transient system. Furthermore, based on the lumped mass matrix, a first-order ordinary differential state-space equation for such an equivalent linear elastic transient system is derived. Simulation results from three transient system examples show that the state-space approach outperforms the Newmark method in terms of accuracy and stability for dynamic systems characterized by high frequency and low damping. The prediction results show that the state-space approach appears to be insignificantly affected by the choice of the consistent or lumped mass matrix. The numerical results show that the root-mean-square errors between the consistent and lumped matrices in the top displacement time histories of a 15-storey plane frame under various seismic intensities are all less than 1%, and in the base reaction time histories responses the discrepancies are only about 0.5%, indicating that the use of lumped mass matrices is quite reliable. When many nodes or degrees of freedom have no assigned mass, the dimensionality of the state-space equation can be significantly reduced using the lumped mass approach. Therefore, the simulation of large-scale systems can be simplified by employing the improved state-space approach with lumped mass matrices, yielding results nearly identical to those obtained using traditional methods. In conclusion, the improved state-space approach has great potential for the simulation of transient behavior in large-scale systems with local nonlinearities.