Abstract

Kinematic orbit determination (KOD) of low earth orbit (LEO) satellites only using single-frequency global navigation satellite system (GNSS) data is a suitable solution for space applications demanding meter-level orbit precision. For some small LEO satellites with the sun-pointing attitude mode, the rotation of the GNSS antenna radiation pattern changes the observation noise characteristics. Since the rotation angle information of the antenna plane may not be available for most low-cost missions, the true elevation cannot be computed and a general elevation-dependent weighting model remains invalid for the onboard GNSS observations. Furthermore, the low-stability GNSS receiver clock oscillator of the LEO satellite at high speeds makes single-frequency cycle slip detection ineffective and difficult since the clock steering events occur frequently. In this study, we investigated the improved KOD strategy to improve the performance of orbit solution using single-frequency GPS and BeiDou navigation satellite system (BDS) observations collected from the Luojia-1A satellite. The weighting model based on exponential function and signal strength is proposed according to the analysis of satellite attitude impact, and a joint single-frequency detection algorithm of receiver clock jump and cycle slip is investigated as well. Based on the GPS/BDS-combined KOD results, it is demonstrated that the clock jump and cycle slip can be properly detected and observations can be effectively utilized with the proposed weighting model considering satellite attitude, which significantly improves the availability and accuracy of orbit solution. The number of available epochs is increased by 12.9% benefitting from this strategy. The orbital root mean square (RMS) precision improvements in the radial, along-track, and cross-track directions are 22.1%, 16.4%, and 6.5%, respectively. Combining BDS observations also contributes to orbit precision improvement, which reaches up to 28.8%.

Highlights

  • Low earth orbit (LEO) satellites are usually equipped with a dual-frequency or singlefrequency global navigation satellite system (GNSS) receiver for computing orbit

  • The Luojia-1A satellite was designed by Wuhan University, China and launched successfully on 2 June 2018

  • The improved data processing strategy of GPS/BeiDou navigation satellite system (BDS)-combined single-frequency Kinematic orbit determination (KOD) is proposed for the LEO satellite using the sun-pointing attitude mode

Read more

Summary

Introduction

Low earth orbit (LEO) satellites are usually equipped with a dual-frequency or singlefrequency global navigation satellite system (GNSS) receiver for computing orbit. The. GNSS-based orbit determination has been widely used for various LEO satellites, such as TOPEX/POSEIDON [1,2,3], CHAMP [4], Jason-1 [5], GRACE [6], Swarm [7], Sentinel [8], FengYun-3C [9], and so on. Determining satellite orbit with a low-cost single-frequency receiver will be the primary option for future small LEO satellites since it saves cost, and meets the accuracy requirement for real-time orbit [20]. Some low-cost single-frequency receivers have successfully implemented the real-time orbit determination of the LEO satellite for high dynamics applications, such as the miniature Phoenix-XNS GPS receiver [21,22], the single-frequency

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call