Abstract
Water management inside a proton exchange membrane fuel cell (PEMFC) is an important issue for improving the performance of a PEMFC. It is necessary to understand water transport phenomena inside a PEMFC for water management. Especially humidity measurement near the membrane electrode assembly is indispensable. In order to measure the humidity, we fabricated the capacity type humidity sensor with thickness of 7 μm using micro-electro-mechanical system techniques. In addition, in order to measure the humidity locally, we reduced the parasitic capacitance by changing the shape of the sensor, and improved the sensitivity of the sensor by carrying out O2 plasma etching on the humidity sensitive layer. Finally, the improved sensor was inserted between the catalyst layer and micro porous layer inside a PEMFC, and the humidity inside it during power generation was measured to confirm that the sensor was functioning.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.