Abstract
The subgroup method is improved in several aspects to address challenges brought on by design features of the Fluoride salt-cooled High-temperature Reactor (FHR). Firstly, the Dancoff correction is applied to resolve the double heterogeneity arising from embedding TRISO fuel particles in the matrix of pebbles. Secondly, a fast Resonance Interference Factor (RIF) scheme is proposed to treat the resonance interference effect in the FHR. In this scheme, the heterogeneous system is converted into a homogeneous one according to self-shielded cross section conservation of the dominant resonant nuclide. The resonance interference effect is considered in the equivalent homogenous system by correcting the non-interfered self-shielded cross sections with RIFs which are obtained by solving the slowing down equation in hyper-fine energy group (∼1M number of energy groups). Finally, the resonance elastic scattering effect becomes considerable due to high temperatures in the FHR. This effect is considered by substitution of the conventional Resonance Integral (RI) table with that generated by the Monte Carlo method. The Monte Carlo method is modified via the Doppler Broadening Correction Rejection (DBRC) method to implement the Doppler broadened scattering kernel. The numerical results show that the Dancoff correction can significantly reduce errors brought about by the double heterogeneity. The fast RIF scheme provides more accurate effective self-shielded cross sections than the conventional iteration scheme. In addition, the speedup ratio of the fast RIF scheme is ∼3.3 compared with the conventional on-the-fly RIF schemes for TRU TRISO. The scheme to generate RI table can resolve the resonance elastic scattering effect encountered by the conventional scheme.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have