Improved Reliability of FPGA-Based PUF Identification Generator Design

Abstract

Physical unclonable functions (PUFs), a form of physical security primitive, enable digital identifiers to be extracted from devices, such as field programmable gate arrays (FPGAs). Many PUF implementations have been proposed to generate these unique n -bit binary strings. However, they often offer insufficient uniqueness and reliability when implemented on FPGAs and can consume excessive resources. To address these problems, in this article we present an efficient, lightweight, and scalable PUF identification (ID) generator circuit that offers a compact design with good uniqueness and reliability properties and is specifically designed for FPGAs. A novel post-characterisation methodology is also proposed that improves the reliability of a PUF without the need for any additional hardware resources. Moreover, the proposed post-characterisation method can be generally used for any FPGA-based PUF designs. The PUF ID generator consumes 8.95% of the hardware resources of a low-cost Xilinx Spartan-6 LX9 FPGA and 0.81% of a Xilinx Artix-7 FPGA. Experimental results show good uniqueness, reliability, and uniformity with no occurrence of bit-aliasing. In particular, the reliability of the PUF is close to 100% over an environmental temperature range of 25°C to 70°C with ± 10% variation in the supply voltage.