Abstract
The present study reports the process intensification of biodiesel synthesis from waste cooking oil using hydrodynamic cavitation (HC) which was achieved by increasing the ratio of the throat/hole perimeter to flow cross section area (α) (α: 1.33 to 13.33 mm−1) of the cavitating device. Initially, the optimization of process reaction parameters such as oil to alcohol molar ratio (1:6.8) and catalyst concentration (NaOH; 1 wt. % of oil) was carried out by response surface methodology (RSM). Thereafter, biodiesel synthesis was carried out in the HC reactor for optimization of cavitating devices (circular Venturi and three orifice plates). Maximum of 99% yield was obtained in 5 min of treatment time by using an orifice plate having 100 circular holes of 0.3 mm diameter each (α : 13.33 mm−1) at the optimum operating inlet pressure of 7 bar. LC–MS and FT-IR analysis of the biodiesel product confirmed the formation of fatty acid methyl esters (FAME). The energy efficiency evaluation of HC revealed that the intensification of HC using a cavitating device of higher α value significantly reduced the energy requirement for the synthesis of biodiesel as compared to the other conventional approaches of cavitation as well as increased the overall reaction rate.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Chemical Engineering and Processing - Process Intensification
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
