Abstract
AbstractThe aim of this study was to investigate the effect of preimpregnation of thermally modified wood (TMW) with paraffin wax emulsion (WE), which was loaded with disodium octoborate tetrahydrate (DOT). The improvements of physical, mechanical, and biological properties of WEDOT-TMW was in focus. The thermal modification (TM) was conducted at 220°C for 4 h. The equilibrium moisture content (EMC), water absorption, volumetric swelling, bending strength, mold and termite resistance of WEDOT-TMW were determined. The boron leaching data were also determined, while the borate was analyzed by Inductively coupled plasma atomic emission spectroscopy (ICP-AES), followed by the model fitting according to a pseudo-second order differential model. The results indicate that WEDOTimproved water repellency, dimensional stability, bending strength as well as the mold and termite resistance of WEDOT-TMW. The boron leaching of WEDOT-TMW was reduced compared with DOT-TMW due to the hydrophobic effect of WE. The pseudo-second order differential model describes accurately the boron leaching process from WEDOT-TMW.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.