Abstract
Ordered nanostructure materials have received attention due to their unique physical properties and potential applications in electronics, mechanics and optical devices. To actualize most of the proposed applications, it is quite important to obtain highly ordered nanostructure arrays. The well-aligned nanostructure can be achieved by synthesizing nanostructure material in the highly ordered template. In this paper, Anodic Aluminum Oxide (AAO) templates were fabricated using a two-step anodization process with pretreatment such as electropolishing and annealing. To reduce process time and get well-aligned pore array, rapid thermal anneal by an IR lamp was employed in vacuum state at 500oC for 2 hours. The pore array is comparable to a template annealed in vacuum furnace at 500oC for 30 hours. The well-fabricated AAO template has a mean pore diameter of 70 nm and the interpore distance of 100nm. The pore density can be as high as 1.2×1010cm-2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.