Abstract
To improve the performance of high-throughput surface plasmon resonance (SPR) imaging sensors, the imperfections of the conventional gold film polarization contrast method and the bare prism polarization contrast method are discussed, and a background extinction method is proposed. Thick gold film is coated as the background area, surrounding gold sensing spots, to form a “gold microwell array”. By blocking the light reflected from the background area with appropriate parameters, an opposite-oriented SPR curve is obtained, which can be exploited to achieve a high signal-to-noise ratio in trace amount detection. The contrast between the sensing spots and the background is effectively improved, and the background is inert to the change of solution. Influences of parameter errors on the SPR curve are also investigated, and results show that extinction adjustment in this method is easy to be realized. The practicability of the background extinction method is proved by an experiment using a home-built SPR imaging sensor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.