Improved photovoltaic performances of dye-sensitized solar cells with ZnO films co-sensitized by metal-free organic sensitizer and N719 dye

Abstract

The co-sensitization is an effective way to enhance the spectral responses of the dye-sensitized solar cells (DSSCs) by using multiple dyes to absorb different parts of the solar spectrum. The organic sensitizers of the triphenylamine derivatives, W3 and W4 dyes, are synthesized with complementary light absorption spectra to that of the commercially available N719 dye. The main absorption peaks are at 400–500nm and 500–600nm for the triphenylamine derivatives and the N719 dye, respectively. Owing to the outstanding cell performance and the higher absorption coefficient, the W4 dye was applied to co-sensitize with the N719 dye. A wide absorption wavelength (400–700nm) for light harvesting is obtained for the co-sensitized ZnO film soaking in the N719 dye for 2h and subsequently in the W4 dye for 1.5h, and thereby an light-to-electricity conversion efficiency (η) value of 4.34% is achieved for the pertinent DSSC, which is higher than those of the cells sensitized with individual W4 dye (3.38%) and N719 dye (3.76%). The co-sensitized ZnO film cannot only possess wider light absorption range but also better sensitizer coverage since the small size of the organic dye (W4) can adsorb on the gaps between the three dimensional N719 dye on the ZnO surface. The electrochemical impedance spectroscopy (EIS) and the incident photo-to-current conversion efficiency (IPCE) are utilized to analyse the interfacial resistance and the wavelength-dependent light-to-electricity efficiency for the DSSCs, respectively.