Improved photovoltaic performance of graphene-based solar cells on textured silicon substrate

Abstract

Abstract Graphene has attracted much interest as an active layer in heterojunction solar cells due to its outstanding properties such as flexibility, transparency, mechanical strength and elevated carrier mobility. In this research, a new technique was presented in order to enhance the efficiency of graphene–based heterojunction solar cells by employing a textured silicon (Si) substrate. Here, two sets of devices were fabricated based on flat and pyramidal structure of Si and the photovoltaic properties of graphene/Si heterojunction solar cells were compared. Selective chemical dissolution of Si wafers was carried out in order to produce pyramidal skeleton. Reduced graphene oxide (rGO) was then transferred on pyramidal Si through electrophoretic deposition (EPD) technique. The evidence of graphene layers on Si substrates was studied using Raman spectroscopy, X–ray diffractometry (XRD) and atomic force microscopy (AFM) analysis. The morphology of samples indicated an enhancement in rGO/Si interface area when the pyramidal structure is applied. Moreover, the enhanced surface area of this sample which is due to elevated roughness of pyramidal structure and wrinkles of graphene layers promotes its antireflective behavior which was proven using reflectance spectroscopy. The average reflectance of the graphene layer on the textured Si was ∼14% in the wavelength range of 400–800 nm which is lower than that of rGO on flat Si. The improved optical properties of graphene on pyramidal silicon can broaden its potential applications in optoelectrical devices such as high-efficiency solar cells. In order to study the photovoltaic properties of rGO/Si samples, a passive layer was formed on Si substrate and a square frame of Ag was coated on it which was acted as a top contact. The current–voltage characteristics showed that the efficiency of rGO/Si heterojunction solar cells was improved when textured silicon was applied.