Improved photovoltaic characteristics of organic cells with heterointerface layer as a hole-extraction layer inserted between ITO anode and donor layer

Abstract

We have fabricated an improved organic photovoltaic (OPV) cell in which organic heterointerface layer is inserted between indium-tin-oxide (ITO) anode and copper-phthalocyanine (CuPc) donor layer in the conventional OPV cell of ITO/CuPc/fullerene (C60)/bathophenanthroline (Bphen)/Al to enhance the power conversion efficiency (PCE) and fill factor (FF). The inserted ITO-buffer layer consists of electron-transporting layer (ETL) and hole-transporting layer (HTL). We have changed the ETL and HTL materials variously and also changed their layer thickness variously. It is confirmed that ETL materials with higher LUMO level than the work function of ITO give low PCE and FF. All the double layer buffers give higher PCE than a single layer buffer of TAPC. The highest PCE of 1.67% and FF of 0.57% are obtained from an ITO buffer consisted of 3nm thick ETL of hexadecafkluoro-copper-phthalocyanine (F16CuPc) and 3nm thick HTL of 1,1-bis-(4-methyl-phenyl)-aminophenylcyclohexane (TAPC). This PCE is 1.64 times higher than PCE of the cell without ITO buffer and 2.98 times higher than PCE of the cell with single layer ITO buffer of TAPC. PCE is found to increase with increasing energy difference (ΔE) between the HOMO level of HTL and LUMO level of F16CuPc in a range of ΔE<0.6eV. From the ΔE dependence of PCE, it is suggested that electrons moved from ITO to the LUMO level of the electron-transporting F16CuPc are recombined, at the F16CuPc/HTL-interface, with holes transported from CuPc to the HOMO level of HTL in the double layer ITO buffer ETL, leading to efficient extraction of holes photo-generated in CuPc donor layer.