Abstract
To create an efficient MEC high current densities and high coulombic efficiencies are required. The aim of this study was to increase current densities and coulombic efficiencies by influencing mass and charge transport in porous electrodes by: (i) introduction of a forced flow through the anode to see the effect of enhanced mass transport of substrate, buffer and protons inside the porous anode and (ii) the use of different concentrations of buffer solution to study the effect of enhanced proton transport near the biofilm. A combination of both strategies led to a high current density of 16.4 A m −2 and a hydrogen production rate of 5.6 m 3 m −3 d −1 at an applied voltage of 1 V. This current density is 228% higher than the current density without forced flow and high buffer concentration. Furthermore the combination of the anode and transport resistance was reduced from 36 mΩm 2 to 20 mΩm 2. Because of this reduced resistance the coulombic efficiency reached values of over 60% in this continuous system.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
