Improved passivation effect at the amorphous/crystalline silicon interface due to ultrathin SiOx layers pre-formed in chemical solutions

Abstract

To improve the passivation effect at a-Si:H/c-Si interface in heterojunction (HJ) solar cells, ultrathin SiOx layers with a thickness of approximately 2 nm were pre-formed on c-Si surfaces in chemical solutions. It was demonstrated that the SiOx layers pre-formed in hot de-ionized water and hydrochloric acid solutions improve effective carrier lifetime, and it is further enhanced through a post annealing process. When the thin SiOx layers were applied to HJ solar cells, increase in both Voc and Jsc was achieved, implying the improved interface quality for these HJ solar cells, as compared with the reference without the SiOx layer.