Improved mass transfer and biodegradation rates of naphthalene particles using a novel bead mill bioreactor

Abstract

AbstractOne of the main challenges in the treatment of polycyclic aromatic hydrocarbons (PAHs) in controlled bioreactors is the hydrophobicity and low solubility of these compounds in the aqueous phase, resulting in appreciable mass transfer limitations within the bioreactor. To address this challenge, we have developed a modified roller bioreactor (Bead Mill Bioreactor) in which inert particles are used to improve mass transfer from the solid phase to the aqueous phase. Experimental results with naphthalene as a model PAH and Pseudomonas putida as a candidate bacterium indicate that both the mass transfer rate from the solid phase to liquid phase and the biodegradation rate in the Bead Mill Bioreactor (BMB) were significantly higher than those in a conventional roller bioreactor (20‐fold and 5.5‐fold, respectively). The enhancement of mass transfer was dependent on the type, size and volumetric loading of the inert particles, as well as concentration of particulate naphthalene. The highest mass transfer coefficient (kLa = 2.1 h−1) was achieved with 3 mm glass beads at a volumetric loading of 50% (particle volume/working volume) with 10 000 mg dm−3 particulate naphthalene. The maximum biodegradation rate of naphthalene attained in the bead mill bioreactor (59.2 mg dm−3 h−1 based on the working volume and 118.4 mg dm−3 h−1 based on the liquid volume) surpasses most other rates published in the literature and is equivalent to values reported for more complex bioreaction systems. The bead mill bioreactor developed in the present work not only enjoys a simple design but shows excellent performance for treatment of PAHs suspended in an aqueous phase. This fundamental information will be of significant value for future studies involving soil‐bound PAHs. Copyright © 2005 Society of Chemical Industry