Abstract
In order to improve the electrochemical performance of LiMn2O4 at elevated temperatures, a series of Li1.2Ni0.2Mn0.6O2-modified LiMn2O4 samples have been synthesized by a facile sol-gel method. The structure and morphology of pristine and modified LiMn2O4 are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The Li1.2Ni0.2Mn0.6O2 coating layer is identified by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS), which plays an important role in reducing the dissolution of manganese, thereby improving the cycle performance and rate capability of the material. The 2 wt% Li1.2Ni0.2Mn0.6O2-modified LiMn2O4 sample exhibits a higher capacity retention of 95.88% than that of the pristine one (81.2%) after 200 cycles at 1C and 25 °C. Furthermore, a capacity retention of 89.74% is obtained for the 2 wt%-modified LiMn2O4 sample after 200 cycles at 1C and 55 °C, compared to 66.34% for the pristine one. Surface modification with a Li-rich Li1.2Ni0.2Mn0.6O2 material is a good way to improve the elevated temperature performance of LiMn2O4.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
