Abstract
Combined cycle power plant takes advantage of the efficiency, fast startup, and small environmental impact. The operation design of this plant is required to make best use of this plant advantage. A large-scale nonlinear mathematical model of this plant was developed to check the plant condition. This simulation model was combined with the optimization using Rosenbrock method. The operation design is optimized in two steps; [Step 1]: Some points of plant condition can be checked roughly; [Step 2]: This plant operation is optimized to design using Rosenbrock method. This optimization is applied to design the combined cycle power plant operation. It is confirmed that this method is effective for the design of plant operation. From this study, plant operation can be designed with this optimization to make best use of this plant advantage. Then operation design point is decided using the optimization method on some evaluation instead of heuristic method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
