Abstract
This paper investigates carbon monoxide (CO) gas sensing performance in a silicon metal-oxide semiconductor field effect transistor (Si MOSFET)-based gas sensor having a structure in which a floating-gate (FG) and a control-gate (CG) are interdigitated in a horizontal direction. The sensing material, indium oxide (In2O3) nanoparticles, is formed by an inkjet printing process between the FG covered with an insulator stack and exposed CG. Decorating the sensing layer with catalytic Pt and applying pulsed pre-bias are introduced as a method to improve CO gas sensing characteristics of the MOSFET sensor. First, CO gas sensing performance with Pt concentration and operating temperature is studied. The sensing performance is measured at 200 °C mainly by applying pulses to the CG. The response, response and recovery times of the MOSFET sensor are significantly enhanced with catalytic Pt decoration. In this work, 5% Pt decoration shows the best sensing characteristics. Response and recovery times are improved by 65% and 70%, by applying a pre-bias of 2 V and −2 V to the CG during response and recovery, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.