Improved Characterization of DNAPL Source Zones via Sequential Hydrogeophysical Inversion of Hydraulic‐Head, Self‐Potential and Partitioning Tracer Data

Abstract

AbstractHigh‐resolution characterization of hydraulic properties and dense nonaqueous phase liquid (DNAPL) contaminant source is crucial to develop efficient remediation strategies. However, DNAPL characterization suffers from a limited number of borehole data in the field, resulting in a low‐resolution estimation. Moreover, high‐resolution DNAPL characterization requires a large number of unknowns to be estimated, presenting a computational bottleneck. In this paper, a low‐cost geophysical approach, the self‐potential method, is used as additional information for hydraulic properties characterization. Joint inversion of hydraulic head and self‐potential measurements is proposed to improve hydraulic conductivity estimation, which is then used to characterize the DNAPL saturation distribution by inverting partitioning tracer measurements. The computational barrier is overcome by (a) solving the inversion by the principal component geostatistical approach, in which the covariance matrix is replaced by a low‐rank approximation, thus reducing the number of forward model runs; (b) using temporal moments of concentrations instead of individual concentration data points for faster forward simulations. To assess the ability of the proposed approach, numerical experiments are conducted in a 3‐D aquifer with 104 unknown hydraulic conductivities and DNAPL saturations. Results show that with realistic DNAPL sources and a limited number of hydraulic heads, the traditional hydraulic/partitioning tracer tomography roughly reconstructs subsurface heterogeneity but fails to resolve the DNAPL distribution. By adding self‐potential data, the error is reduced by 24% in hydraulic conductivity estimation and 68% in DNAPL saturation characterization. The proposed sequential inversion framework utilizes the complementary information from multi‐source hydrogeophysical data sets, and can provide high‐resolution characterizations for realistic DNAPL sources.