Abstract
The aim of the present work was to optimize the reduction and removal of chromium from aqueous solutions by a biosorption system consisting of a bacteria supported on a zeolite. The system proposed combines the biosorption properties of Arthrobacter viscosus, with the ion exchange capacity of NaY zeolite. Experiments were also performed without the zeolite for comparison purposes. Experimental parameters such as solution pH, biomass concentration and initial Cr(VI) concentration were investigated in order to assess their influence on the biosorption system. The results revealed that chromium biosorption was highly pH dependent. The lower pH values favored Cr(VI) reduction, while higher solution pH enhanced total chromium removal. After the optimization of the parameters in study, the highest content of chromium in the zeolite (0.9%) and best uptake (13.0 mgCr/gzeolite) were obtained for the experiment at pH 4, biomass concentration of 5 g L−1 and initial Cr(VI) concentration of 100 mg L−1. After the biosorption process, the samples were characterized by chemical analyses (ICP-AES) and X-ray photoelectron spectroscopy (XPS). The XPS spectra of bacteria revealed that the chromium loaded on the biomass surface was in the trivalent form.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Biodeterioration & Biodegradation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
