Abstract
High-modulus polyethylene (PE) tapes were grafted with acrylic acid using a two-step procedure. The tapes were first subjected to He/Ar corona discharge, immediately followed by exposure of the corona-treated tapes to acrylic-acid-saturated He gas. Evidence for the grafting was provided by X-ray photoelectron spectroscopy, which showed the surface of the treated tapes to consist of 64% acrylic acid and 36% PE. The grafting of acrylic acid is confined to the outermost surface layers, as indicated by reflection infra-red spectroscopy. Pull-out tests showed that the corona grafting of acrylic acid improves adhesion to epoxy resins by a factor of eight. Moreover, the increased adhesion is not achieved at the expense of a decrease in mechanical properties of the high-modulus PE tapes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
