Abstract
Ni-Mo-Ce0.8Sm0.2O1.9 (SDC) composites are prepared and investigated as anodes of solid oxide fuel cells with methanol as fuel. The addition of Mo improves the catalytic activity for methanol pyrolysis and the resistance to carbon deposition of Ni-SDC anode. The anode with a mole ratio of Mo to Ni of 0.03:1 exhibits the lowest polarization resistance. The cell with that anode and SDC-carbonate composite electrolyte shows a maximum power density of 680 mW cm−2 at 700 °C. The stability of the cell is enhanced with the increase of the content of Mo in the anode, which is mainly attributed to the decreased amount of carbon deposits with a high graphitization degree.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.