Abstract
This paper proposes an improved 4H–SiC metal semiconductor field effect transistor with a bulgy channel (BC-MESFET) whose gate-source and gate-drain drift regions are shifted downward 0.1 μm relative to the channel below the gate. By introducing recesses at both ends of the metal gate, both the DC and AC characteristics of the structure have been greatly improved. The simulation results show that the saturation current of BC-MESFET is 30% higher than that of DR-MESFET, and the breakdown voltage is 78% higher. Therefore, the maximum output power density has a significant increase of 137%. In terms of RF, since the gate-source capacitance of the BC-MESFET structure is 31% lower than that of the DR-MESFET, its characteristic frequency is also improved by 18%. In this paper, aiming at high power added efficiency (PAE), the bump height H of the buffer layer under the lower gate is optimized, and a structure with 25% higher PAE than DR-MESFET is obtained.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
