Abstract
Abstract The creep characteristics of the extruded Mg–4Zn–0.5Ca and Mg–4Zn–0.5Ca–2RE (wt%) alloys were investigated using impression creep tests in the temperature range of 423–498 K. The creep behavior of both alloys was well described by the Garofalo hyperbolic sine relationship modified for the threshold stress concept. The stress exponent was 5 and the activation energies for creep were found to be close to that of the lattice diffusion in the α-Mg, i.e., 135 kJ mol –1 . Lattice diffusion-controlled climb of dislocations was thus determined as the dominant rate-controlling mechanism. At lower temperatures and higher stresses, the power–law breakdown was observed. The appearance of the threshold stress was attributed to the finely dispersed second phase particles that are present in the microstructure. Threshold stresses decreased linearly with increasing temperature. The RE-containing alloy showed higher threshold stresses and better creep resistance, due to the effect of load transfer resulting from high volume fraction of the second phases and formation of the thermally stable (MgZn) 12 RE particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.