Abstract
In this study it is demonstrated that a correct description of the mixing behavior of an anaerobic digester is necessary to accurately model and predict the reactor performance, especially at a larger scale operation. A lab-scale (3.78 l) and a pilot-scale (120 l) anaerobic digester were operated at both mixing and non-mixing conditions. At lab-scale no significant difference in performance was found between these conditions. In each case about 0.25 lCH4/lreactor/d of biogas was produced. The model predictions were in close agreement with measured values. At pilot-scale, however, the influence of mixing became important. A reduction of about 10% of methane production occurred during unmixed conditions. Furthermore also a build-up of volatile fatty acids (up to 3 gCOD/l) prevailed. This behavior could not be predicted by using a CSTR approach. In contrast, it was accurately predicted with the proposed model, which includes a more rigorous mixing next to common reaction kinetics. Prediction of the daily biogas production assuming a perfectly mixed reactor revealed an overestimation of the biogas production by 10%. It is therefore recommended to use more accurate mixing models in order to predict biogas production from anaerobic digesters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.