Abstract
Cold in-place recycling (CIR) is a pavement rehabilitation method that processes an existing hot-mix pavement, sizes it, mixes in additional asphalt cement, and lays it back down without off-site hauling and processing. The added asphalt cement is typically emulsified asphalt. A recent development in CIR technology is the use of expanded (foamed) asphalt rather than emulsified asphalt to bind the mix. This combination of CIR and expanded asphalt technologies is termed cold in-place recycled expanded asphalt mix (CIREAM). The Ministry of Transportation Ontario (MTO) constructed a CIREAM trial section on Highway 7 in July 2003. The 5-km CIREAM trial section was constructed adjacent to an 8-km section on which conventional CIR was performed. CIREAM placement resulted in a smooth, hard, uniform surface that provided an excellent platform for paving operations. The CIREAM placement progressed in a continuous and efficient manner, with 5 km placed over a 3-day period. Indirect tensile strength testing was carri...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
