Implementation of an Efficient Design of Multi ported Memory on FPGA

Abstract

The utilization of block RAMs (BRAMs) is a critical performance factor for multi ported memory designs on field programmable gate arrays (FPGAs). Not only does the excessive demand on BRAMs block the usage of BRAMs from other parts of a design, but the complex routing between BRAMs and logic also limits the operating frequency. This paper first introduces a brand new perspective and a more efficient way of using a conventional two reads one write (2R1W) memory as a 2R1W/4Rmemory. By exploiting the 2R1W/4R as the building block, this introduces a hierarchical design of 4R1W memory that25% fewer BRAMs than the previous approach of duplicating the 2R1W module. Memories with more read/write ports can be extended from the proposed 2R1W/4R memory and the hierarchical 4R1W memory. Compared with previous xor-based and live value table-based approaches, the proposed designs can, respectively, reduce BRAM usage for 4R2W memory designs with 8K-depth. For complex multiport designs, the proposed BRAM-efficient approaches can achieve higher clock frequencies by alleviating the complex routing in an FPGA.