Abstract
BackgroundThe outcome of the evaluation of impression techniques accuracy may improve the selection criteria for an ideal technique. The aim was to evaluate the accuracy of the open and closed tray techniques for implant impressions, in a partially edentulous maxilla, replaced with a three-unit fixed partial denture, as well as to assess the effect of implants parallelism on accuracy.Material and methodsThis is an experimental in vitro study to evaluate impressions accuracy of a simulated area restored with an implant retained FPD, using the open and closed tray implant impression techniques. The effect of implant position angulation, parallelism, and implant systems (Straumann, SIC Invent, Osstem) was also evaluated. Three custom-made acrylic resin test models were prepared with two parallel and two non-parallel implants, on either side of a maxillary arch. One hundred and ninety-two impressions were made using monophase VPS impression material. Their master casts were obtained and evaluated for the horizontal and vertical discrepancy. The casts were scanned using a model scanner. The distances between the two reference points were measured.ResultsThe Straumann and SIC Invent implants showed no statistically significant differences (Mann-Whitney U test), regarding accuracy for both the open and closed tray impression techniques (P = 0.667 and P = 0.472). There were no significant differences for the parallel and non-parallel implants (P = 0.323 and P = 0.814), respectively, while the Osstem system showed statistically significant differences for both the open and closed tray impression techniques (P = 0.035) and between the parallel and non-parallel implants (P = 0.045). For the vertical discrepancies, significant differences were detected (chi-square test) between the open and closed tray impression techniques (P = 0.037).ConclusionsWithin the limitations of this study, there were generally no significant differences between open and closed, although better results were obtained for the open tray techniques. On the use of the non-parallel implants, the open tray technique provided a better result than the closed tray technique.
Highlights
A three-dimensionally accurate impression is a pre-requisite for implant restorations since there is no intervening periodontal ligament at the implant-bone interface to compensate for any inaccuracies [1, 2]
Within the limitations of this study, there were generally no significant differences between open and closed, better results were obtained for the open tray techniques
On the use of the non-parallel implants, the open tray technique provided a better result than the closed tray technique
Summary
A three-dimensionally accurate impression is a pre-requisite for implant restorations since there is no intervening periodontal ligament at the implant-bone interface to compensate for any inaccuracies [1, 2]. Numerous factors impact on implant impression accuracy, including the technique, the materials used, and the number of implants, as well as the parallelism of the implants or abutments. Impression inaccuracies impact negatively on the precision fit of the restoration [1, 3]. The open and closed tray impression techniques are both advocated, each has advantages and disadvantages. Non-parallel implants may strain the impression during tray removal, due to the significant force required for its withdrawal, which compromises accuracy [1]. The aim was to evaluate the accuracy of the open and closed tray techniques for implant impressions, in a partially edentulous maxilla, replaced with a three-unit fixed partial denture, as well as to assess the effect of implants parallelism on accuracy
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
