Abstract
The nature of passive films, which were formed at various potentials in 4.8 M H2SO4 solution on the lead-tin and lead-tin-calcium alloys, is studied by the method of impedance spectroscopy. At the potentials of 1.3 and 1.7 V, the electrode impedance is presented by the equivalent circuit, which corresponds to the formation of a bilayer film consisting of lead(II) sulfate and oxide on the electrode surface. Lead(II) oxide, which forms under the layer of lead sulfate, determines a high resistance of passive layer on the electrodes of lead alloys under investigation. An introduction of tin into the lead alloys significantly decreases the resistance of passive layers. An addition of calcium to the lead-tin alloy raises the impedance of the system. At a potential of 2.05 V, a single-layer compact passive film forms on the electrodes of the test lead alloys. It consists predominantly of lead oxides PbOx (1 < x ≤ 2), which exhibit a higher electron conductivity. An introduction of tin into the lead alloys decreases the resistance of formed films; calcium has almost no effect on the resistance of passive film under these conditions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
