Abstract
Biofilm attached cultivation is a promising method for efficient production of microalgae. Determining the surface property index to select an appropriate substrate benefiting the algae adhesion and biofilm formation is very important for the cultivation method. This work focused on elucidating and quantifying the influence of surface wettability and roughness of substrate on Chlorella vulgaris adhesion. Firstly, surface modified styrene-acrylic (SA) resin films by adding different dosage of perfluoroalkyl ethyl acrylate (FM) were prepared. Property characterization shows that the surface contact angle in water, formamide and diiodomethane of FM modified SA films is significantly associated with the FM dosage, while the other surface properties including zeta potential, surface potential and surface roughness have insignificant difference. The calculated surface free energy parameters show that the SA films belong to the non-polar substrata. A well quantitative correlation that the adhesion capacity of C. vulgaris linearly declines with the increase of water contact angle was obtained. And a near linear relationship between the adhesion capacity and the surface free energy (γ), or the cohesion free energy (ΔGcoh) was also observed. Secondly, the surface roughness solely changed SA films were prepared by replicating the morphology of stainless steel sieves through the PDMS template method. The patterned SA films have alternately arranged rectangular “valleys” and “ridges”. A well linear correlation between the microalgae adhesion capacity and the surface roughness was also obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.