Abstract
Recently, the use of prismatic cells in electric vehicles has increased significantly. Unlike the cylindrical or pouch format, the prismatic cell format has not been sufficiently investigated. In this study, quasi-static mechanical tests are performed on prismatic cells. The tests include a cylindrical and a hemispherical impactor that mechanically load the cells in all three spatial directions. In both in-plane directions, a cell stack consisting of three cells is tested to capture the influence and loading of the outer cells of a cell stack. It is found out that, in the in-plane tests, short-circuiting occurs first in the outer cells and subsequently in the middle cell, which is targeted by the impactor. This result can also be supported by computed tomography scans. The results illustrate that, when evaluating the crash safety of battery cells, several cells should always be tested in order to capture the different loading of the cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.