Abstract
Abstract In this study, we developed flexible composites using silicone rubber (SR) or polydimethylsiloxane as the matrix and WO3 and BaO nanoparticles as filler to analyze their radiation-shielding performance. The linear attenuation coefficient (LAC) values for the prepared composites were reported to range from 0.059 to 1.333 MeV by using the experimental method. At 0.059 MeV, the SR with 40% of BaO NPs possesses the highest LAC, followed by SR with 20% of BaO and WO3 NPs. The SRs S-2 and S-4 that contain WO3 and/or BaO exhibit continuously greater LAC values than the sample S-1. Numerically, the LAC for S-2 (with 40% of BaO NPs) is 1.6 times greater than that for S-1 (free BaO and WO3) at 0.662 MeV, while the LAC for S-2 is 1.47 times more than that for S-1 at 1.275 MeV. We examined the impact of the thickness of the prepared composites on the attenuation performance by studying the transmission factor (TF) at two different thicknesses (1 and 2 cm). For S-1 and S-2, the TF decreases due to the increase of the thickness from 1 to 2 cm. The TF for S-1 with a thickness of 1 cm is 75% at 0.059 MeV, while it is 56% (for 2 cm). We evaluated the percentage decrease in the TF at 0.059 MeV for every SR as the thickness changes from 1 to 2 cm. For S-3, S-4, S-5, and S-6, the percentage decrease in the TF is extremely significant varying from 98% to 99%. This suggests that increasing the thickness of these SR samples from 1 to 2 cm has a major effect on the shielding capabilities they possess, particularly at low energies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have