Impact of wind on the spatial distribution of rain over micro‐scale topography: numerical modelling and experimental verification

Abstract

AbstractThe wind‐driven‐rain effect refers to the redistribution of rainfall over micro‐scale topography due to the existence of local perturbed wind‐flow patterns. Rainfall measurements reported in the literature point to the fact that the wind‐driven‐rain distribution can show large variations over micro‐scale topography. These variations should be taken into account in hillslope hydrology, in runoff and erosion studies and in the design of rainfall monitoring networks. In practice, measurements are often not suitable for determining the wind‐driven‐rain distribution. Therefore, a few researchers have employed numerical modelling. In order to provide confidence in using numerical models, experimental verification for a range of different topographic features is imperative. The objective of this study is to investigate the adequacy of a two‐dimensional Computational Fluid Dynamics (CFD) model to predict the wind‐driven‐rain distribution over small‐scale topography. The numerical model is applied to a number of topographic features, including a succession of cliffs, a small isolated hill, a small valley and a field with ridges and furrows. The numerical results are compared with the corresponding measurement results reported in the literature. It is shown that two‐dimensional numerical modelling can provide a good indication of the wind‐driven‐rain distribution over each type of micro‐scale topography that is considered in this study. It is concluded that more detailed verification procedures are currently inhibited due to the lack of available and detailed spatial and temporal rainfall data from field measurements. Copyright © 2005 John Wiley & Sons, Ltd.