Abstract
Statement of problemThree-dimensional (3D) printing enables the fast fabrication of definitive fixed dental prostheses (FDPs). However, data on the effects of surface treatments on their chemical and mechanical properties are lacking. PurposeThe purpose of this in vitro study was to examine the influence of different surface treatments on a 3D printed resin in comparison with 2 veneering composite resins. Material and methodsA total of 288 specimens were manufactured from a 3D printed resin (VarseoSmile Crownplus) or veneering composite resins (GRADIA PLUS; VITA VM LC flow). Surfaces underwent varnishing, coating, polishing or remain untreated. Conversion rate (DC), surface roughness (SR), Martens parameter, flexural strength (FS), and 3-body wear (3BW) were determined (n=12). Statistical analysis was performed using Mann-Whitney-U, Kruskal-Wallis, and Spearman correlation tests (α=.05). ResultsAfter polishing, the 3D printed resin showed higher DC, SR, and 3BW but lower Martens parameters compared with veneering composite resins (P<.007). After goat hair brushing, the 3D printed resin showed lower FS than VITA-VCR (P=.043). For the 3D printed resin, goat hair brushing or GC-Varnish reduced SR, while VITA-Varnish showed the lowest 3BW (P<.045). For both veneering composite resins, goat hair brushing led to low SR and 3BW and high EIT and FS (P<.043). Silicone polishing led to low EIT of the 3D printed resin and low EIT and FS of GC-VCR (P<.009). Coating resulted in a lower EIT than the untreated surface and higher 3BW than GC-Varnish (P<.030). ConclusionsThe 3D printed resin showed higher DC, SR, 3BW and lower HM, EIT, and FS values than the veneering composite resins. Polishing with a goat hair brush can be recommended for all tested materials. For the 3D printed resin, varnishing presents a promising alternative with regard to SR and 3BW. Silicone polishing and coating cannot be recommended.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
