Impact of Urban Morphology on High-Density Commercial Block Energy Consumption in Severe Cold Regions

Abstract

In sustainable city development, urban form plays an important role in block energy consumption, and as different environmental contexts and block functions create differences in energy use, it is necessary to study the relationship between morphology and energy consumption under the dual constraints of special environments and special block functions. Urban high-density blocks have concentrated energy consumption, high energy intensity, and complex morphological layout, but the influencing mechanism of the block’s morphology on its energy consumption remains unclear. Accordingly, this study focuses on the mechanism and evaluation method of the influence of morphology on the energy consumption of high-density commercial blocks in severe cold regions. Through Grasshopper model extraction, EnergyPlus performance simulation, Pearson correlation analysis, and linear regression analysis, this study extracts and classifies high-density commercial blocks in Harbin, China, into six basic layout types (Courtyard, Courtyard-T, Slab, Slab-T, Point, Point-T) according to their horizontal and vertical morphology, analyzes the energy consumption characteristics of each basic type, examines the relationships between energy use intensity (EUI) and building density (BD) and between floor area ratio (FAR) and building height standard deviation (BHSD), and constructs theoretical models by controlling variables to study the effect of a single form parameter on block EUI. The research findings are as follows: (1) The annual energy consumption of Point and Slab blocks is relatively low, whereas that of Courtyard and Courtyard-T blocks is higher due to the lack of open space in Courtyards and the poor ventilation in summer. (2) FAR is significantly correlated with the energy consumption of high-density commercial blocks in severe cold regions, while the effects of BD and BHSD are weaker than those of FAR. For every 0.1 increase in BD, every 1 increase in FAR, and every 1(m) increase in BHSD, the Winter Daily EUI of the Slab block changes by +0.87, −2.26, and −0.22 (kWh/m2), respectively, whereas that of the Slab-T block changes by −0.38, +0.68, and +0.08 (kWh/m2), respectively. (3) Controlling other variables, a large BD is theoretically beneficial to energy performance in the blocks, and increasing BD in the range of 0.4–0.55 has a significant effect on lowering energy consumption in Point blocks. EUI increases with the increase in FAR, while the change depends on different block types with the increase in BHSD. This study provides design strategies for high-density commercial blocks in severe cold regions. Under different layout types, though EUI shows different relationships with BD, FAR, and BHSD, Slab-T and Point-T blocks can achieve excellent energy performance by appropriately increasing BD and decreasing FAR, whereas Slab blocks need to decrease BD while increasing FAR. The patterns found in this paper can provide strategic help for policymaking and early urban design.