Abstract
In this paper, a top-gated Germanene nanoribbon field effect transistor (GeNR-FET) with and without applying a compressive strain is investigated. Three strain strengths (ε = 3%, 5% and 10%) are applied to the different regions of the proposed GeNR-FET and the obtained transistor characteristics are compared with each other. Moreover, physical and electronic parameters of unstrained and strained GeNR are calculated. The results indicate that the bandgap and electron effective mass of GeNR increase firstly by increasing the strain strength but then decrease and this behavior affects on the transistor figures of merit. We find that the Ion/Ioff ratio and subthreshold swing (SS) of the unstrained FET improves when a 3% compressive strain is applied to the whole of the device. Also, applying a 10% strain to the device increases the ON current of the FET due to strain-induced self-doping behavior, but the obtained transistor parameters for this structure are not very satisfactory. Next, we apply the compressive strain either only to the channel or only to the source and drain of the devices. The obtained results show, due to high lattice mismatch between the channel and the leads, the transistor performance of the strained FETs are almost the same or even worse than that of the unstrained one. A novel engineered device is proposed and the transistor figures of merit and in particular, the analog performance are emphasized. It is found that the new proposed device has a better Ion/Ioff ratio and SS. In addition, negative differential resistance occurs in this transistor. The analog performance of the novel device is obtained and compared with the unstrained and 3% strained GeNR-FET in the subthreshold region. It is observed that the proposed device has a better transconductance and voltage gain so that it is a good candidate for analog applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.