Abstract
This study investigated the impact of ultra-shear technology (UST) processing on dairy-pea protein dispersions with different fat levels. Raw milk, skim milk, and cream, as well as model dispersions with combinations of dairy products and pea protein (i.e., raw milk with pea protein, skim milk with pea protein, and cream with pea protein) were employed as test samples. UST experiments were conducted at a pressure of 400 MPa and 70 °C shear valve exit temperature. The UST treatment increased the viscosity of the dispersions and the increases depended on the fat level. Dairy-pea protein dispersions from raw milk and skim milk were shear thinning and mathematically described by the power-law model defined by the consistency coefficient, K (Pa·sn) and the flow behavior index, n. UST treated cream + pea protein dispersions produced structures with gel-like characteristics. Microstructure and particle size analysis determined by laser scanning microscope revealed a reduction in particle size after UST treatment in raw milk + pea protein and skim milk + pea protein dispersions up to 7.55 and 8.30 μm, respectively. In contrast, the particle mean diameter of cream + pea protein dispersions increased up to 77.20 μm after the UST treatment. Thus, the effect of UST on the particle size and rheological behavior of the dispersions depended on the fat level. UST-treated dispersions were stable with no visible phase separation or sedimentation upon centrifugation at 4000×g for 30 min (4 °C). Heat treatment and freeze–thaw treatment of UST-treated samples showed stable blends immediately after the treatments, but subsequent centrifugation showed solid separation. Results from the study suggest that UST is a potential technology to produce stable dairy + pea protein liquids foods with different rheological characteristics for diverse applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.