Impact of thick PMMA plates by long projectiles at low velocities. Part I: Effect of head’s shape

Abstract

A hybrid experimental–numerical investigation of the penetration process in thick polymethylmethacrylate (PMMA) plates was carried out. The response of such plates to the impact of long hard steel projectiles having either blunt, hemispherical or ogive-head shapes was investigated experimentally in the range of velocities of 100 (m/s)<V0<250 (m/s). The penetration process can be divided into 3 stages: entrance, propagation and backwards bouncing. The last two stages are associated with brittle fracture of the plates. The tests were modeled using 3D explicit finite element analyses. The numerical results provide insight regarding the variations of field variables such as stresses, velocities, resisting forces and energies. A good agreement regarding the trajectory of the projectile and the depths of penetration is obtained. The enhanced backwards bouncing phenomenon is explained, and it is shown that the average deceleration during the penetration process is constant. The resisting force to the penetration is higher for blunt projectiles. It is 10% lower for the hemispherical head and 50% lower for ogive-headed projectiles.