Abstract
This paper proposes the design of a silicon photonic crystal waveguide with a hexagonal lattice structure. In the proposed structure, the effect of temperature variation on the photonic band edges has been studied. Structural design parameters have been optimized for TM and TE modes to obtain bandgap in the optical communication window of 1550 nm at room temperature. The variation in the refractive index of the silicon slab with temperature ranging from 300 K–400 K has been considered and the tuning of photonic band-edge wavelength with thermo-optic effect is presented. The band edges are found to shift linearly with changes in temperature for both TE and TM modes. A sensitivity of 0.0595 nm/K for TM mode and 0.0587 nm/K for TE mode has been observed and thus the proposed structure can be used as a temperature sensor. This paper also presents the tuning of the bandgap and band-edges by changing the refractive index of the holes in the proposed structure. The wavelength of the band-edges is found to increase whereas the bandgap is found to decrease on increasing the refractive index of the holes for both TM and TE modes. It is observed that the proposed structure offers a refractive index sensitivity of 10.105 nm/RIU for TM mode and 34.953 nm/RIU for TE mode and thus can be used as a refractive index sensor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.