Impact of the implementation of PM abatement technology on the ambient air levels of metals in a highly industrialised area

Abstract

Data on the spatial and time (2002–2005) variation of levels of trace elements and the source attribution of these elements in the ceramic cluster of Castelló (Eastern Spain) are presented and discussed. Earlier studies concluded that metal levels in PM 10 were one of the most critical parameters for attaining the EU legal requirements of the air quality standards. Levels of Li, Sc, Co, Zn, As, Se, Rb, Zr, Cd, Cs, Ce, Tl and Pb were higher than the usual range of concentration in urban areas of Spain, and some of them exceeded the concentration ranges obtained for other industrial sites in Spain. Of these elements, Zr, Zn, Pb and As (and probably Tl) may be considered as tracers of the ceramic emissions from the study area. A downward trend was observed for most of them, simultaneously, with the progressive implementation of the emission abatement techniques, especially those applied to the PM abatement of the manufacture of glaze components and the avoidance of the use of specific raw materials with high contents of impurities. At the end of the study period, the elements for which the EU sets limit or target values met the established requirements for 2013 (2005 for Pb), whereas, at the beginning of the study some elements exceeded the 2013 target values. Furthermore, a detailed discussion on the interpretation of peak concentration events and source attribution for a number of trace elements is presented. Five different sources were identified: mineral emissions (from clay use and handling), industry (mainly glaze production and use), road traffic, sea spray and the regional background influenced by a fuel oil-power plant and a petrochemical plant.