Abstract
In this work, the impact of the heat treatment condition of steel AISI 4140 on its frictional contact behavior with coated cemented carbide and cubic boron nitride (CBN) in dry metal cutting is experimentally investigated. Two different kinds of tests were performed. The frictional behavior was investigated under conditions very similar to metal cutting on a frictional test bench, which was installed on a broaching machine. Additionally, orthogonal cutting processes with linear workpiece geometries were conducted on the same machine. The cutting experiments included observations of cutting forces, high-speed filming of chip formation, chip thickness ratio analysis as well as a comprehensive metallographic characterization of the chips and workpiece surfaces. The impacts of the undeformed chip thickness and cutting speed were investigated individually for coated cemented carbide and CBN as cutting materials. The frictional examinations delivered the Coulomb friction coefficients for all four combinations of work and cutting materials as a function of the relative velocity. The identified frictional behaviors explain the dependencies of forces, chip thicknesses, and surface microstructures on the tool and process conditions during the cutting tests.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.