Abstract

SUMMARYResearch backgroundThe production of lager beer includes successive repitchings of a single Saccharomyces pastorianus starter culture. During the beer production process, the yeast is exposed to several stress factors which could affect the fermentation performance. An incomplete fermentation represents a waste of fermentable extract and leads to a beer with higher carbohydrate levels, which could result in a beer with an atypical flavour profile. The aim of the present study is to determine the impact of successive exploitation of a single S. pastorianus starter culture on the wort saccharide uptake dynamics.Experimental approachThe fermentation was monitored during the production of twelve batches of beer, where the starter yeast culture was reused twelve times without any further treatment. The following beer production steps were monitored: wort production, yeast starter culture propagation, primary fermentation, secondary fermentation and the final product. The work was conducted on an industrial scale employing standard process conditions.Results and conclusionsMonitoring of the starter culture viability during successive fermentations indicated no reduction in the viability and vitality of the yeast culture. Monitoring of the fermentable wort saccharide concentrations (glucose, fructose, disaccharides and trisaccharides) revealed a correlation between an improvement in saccharide utilisation and starter culture age. Saccharide uptake efficacy proportionally matched the repitching frequency. Successive exploitation of S. pastorianus starter culture has a positive impact on the dynamics of saccharide utilisation from classical hopped wort and the young beer. Furthermore, the final lager beer contains no residues of fermentable saccharides that could affect the overall quality and flavour profile.Novelty and scientific contributionResults showed the impact of twelve successive wort fermentations on the dynamics of saccharides uptake that gives brewers important information. The added value of the experiment is all the work done on the industrial scale, with control of all processes and usage of exactly the same raw materials. This study contains usable technological data on the behaviour of saccharides during brewing on the industrial scale, which is not yet found in the literature.

Highlights

  • Beer production involves the following procedures: wort production, primary and secondary fermentation, filtration and packaging of the final product

  • Successive exploitation of S. pastorianus starter culture has a positive impact on the dynamics of saccharide utilisation from classical hopped wort and the young beer

  • The ratio was constant between the particular groups of fermentable wort saccharides

Read more

Summary

Introduction

Beer production involves the following procedures: wort production, primary and secondary fermentation, filtration and packaging of the final product. The starter culture for lager production is Saccharomyces pastorianus, and the culture is re-used successively. The yeast must be removed in a controlled manner at the end of primary fermentation and stored under standard conditions to preserve its quality and prevent unwanted flavour effects in the beer and to provide the yeast for subsequent repitching [1]. The efficiency of fermentation and the character and quality of the final product are intimately linked to the amount and health of the yeast being employed. Biotechnol. 59 [1] 16–23 (2021)

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call