Impact of Sintering Temperature Variation on Porous Structure of Mo2TiAlC2 Ceramics.

Abstract

Mo, TiH2, Al and graphite elemental powders were used as starting materials for the activation reaction sintering process, which was employed to fabricate porous Mo2TiAlC2. The alteration of phase constitution, volume expansion, porosity, pore size and surface morphology of porous Mo2TiAlC2 with sintering temperatures ranging from 700 °C to 1500 °C were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and pore size tester. Both the pore formation mechanism and activation reaction process at each temperature stage were investigated. The experimental results illustrate that the sintered discs of porous Mo2TiAlC2 exhibit obvious volume expansion and pore structure change during the sintering process. Before 1300 °C, the volume expansion rate and porosity increase with the increment of temperature. However, with the sintering temperature above 1300 °C, the volume expansion rate and porosity decrease. At the final sintering temperature of 1500 °C, porous Mo2TiAlC2 with a volume expansion rate of 35.74%, overall porosity of 47.1%, and uniform pore structure was synthesized. The pore-forming mechanism of porous Mo2TiAlC2 is discussed, and the evolution of pressed pores, the removal of molding agents, the decomposition of TiH2, and the Kirkendall effect caused by different diffusion rates of elements in the diffusion reaction are all accountable for the formation of pores.