Impact of shell structure stiffness on aero-structural coupling in wind turbine rotor blades

Abstract

Wind turbine rotor blades are heavily loaded composite structures that experience a mixture of aerodynamic, inertial, gravitational, and gyroscopic forces during their operation life. Due to the high loads, the cross-sections of the blades are subjected to in-plane and out-of-plane deformations. The out-of-plane deformations are referred to as shear warping while the in-plane deformations are also called blade breathing. Blade breathing depends on the magnitude of the mechanical loads, which are expressed by means of internal forces and moments, and the stiffness of the blade shell.In this work, the relationships between in-plane cross-sectional deformations and internal loads are investigated. For the quantification of the deformation, a reference blade is studied via 3D finite shell element simulations for different loading scenarios. The cross-section of interest is located at the radial position of maximum chord. To compare the shape of the cross-sections in the undeformed and the deformed configurations, a procedure is proposed to relate the positions of nodes associated with the cross-section of interest in both configurations to a joint coordinate system. The shape of the deformed cross-section is then extracted and compared with the undeformed configuration. The comparison is executed for the individual internal forces and moments, namely flapwise and edgewise bending moments, normal force, shear forces, and torsion moment, respectively. The deformation patterns are discussed and it is addressed how these may influence the aerodynamic behavior of the cross-section under consideration.