Impact of paving surface material on thermal conditions within a residential building

Abstract

Listen

Translate article

This paper presents the impact of paving surface material on thermal comfort in a residential building. The aim of the study was to demonstrate differences in temperature, measured near a building’s walls, depending on their location (relative to the cardinal directions) and the type of paving surface material outside the building (in its immediate vicinity, considering the cardinal directions). The study found differences in temperature values recorded near walls located on the south-west side, which faced a garden and a grassy surface, compared to the temperature of the walls that faced a street with asphalt and concrete paving blocks. It should be noted that the study was carried out in the summer, when the interior of the building was not heated. The facade of the building had not been additionally insulated and retained its original historical form (facade render). The method used in the study consisted of temperature measurements taken near the building’s walls using a Steinberg System weather station’s sensors. The measurement results supported the hypothesis that wall temperature varies depending on a space’s placement relative to the cardinal directions and the surface paving material in the space adjoining the building. The results of the study are presented using line graphs. The study is of scientific value and the results may also be useful in site development planning practice. The thermal conditions are a major factor that affecting the comfort of various types of buildings, including housing.