Impact of nano-ZnO consolidated poly (ether ether sulfone) nano filtration membrane for evacuation of hazardous metal particles

Abstract

Industrial wastewater contains heavy metals, colors, dyes, cyanides, and natural manufactured compounds are expanding around the world. It prompts extreme water shortage just as water quality issues. With enhancing worldwide interest for clean and reestablish water for human utilization. Wastewater treatment with membrane innovation is arising as a main cycle to address the issues. In this current work, we have found the expulsion of dangerous metal particles utilizing a nano-ZnO (0.5 wt%) incorporated poly (ether ether sulfone) (PEES) nanofiltration membrane. The created membranes were reviewed by ATR-FTIR, AFM, SEM investigations, XRD, contact angle estimation, mechanical properties, pure water flux, porosity and molecular weight cut-off, arsenic, fluoride, and nitrate rejection studies were illustrated. Because of the hydrophilic nature of ZnO, the resultant membranes had better hydrophilicity than PEES membranes based on porosity, water content, surface chemistry, membrane morphology, and contact angle data. The Nano-ZnO incorporated membrane demonstrated a superior quality execution contrasted with neat PEES membrane. We discovered that the rejection of As(III) and As (V) were > 85% and > 98% separately, and an expanded permeability of 559.28 ± 2 Lm−2 h−1 and 297.95 ± 2 Lm−2 h−1 individually was seen at pH 10. Fluoride and nitrate particles additionally indicated the most extreme expulsion efficiencies were > 89% and > 75% separately. The prepared membrane samples were incubated in water (40 °C) and sodium hypochlorite solution (active chlorine concentration 400 mg/L) for up to 10 days to determine the stability of polymer membrane matrix. The general outcomes inferred that the nano-ZnO incorporated PEES membrane gave remarkable result to eliminate dangerous metal ions with moderate permeability.