Abstract
The influence of mechanical activation (MA) and mechanochemical activation (MCA) with Fe and Fe2O3 on the microstructural changes, leachability and leaching rate of natural chalcopyrite was investigated and compared. MCA pretreatments were carried out by chalcopyrite co-milling with Fe and Fe2O3 for 20 and 50 min. The XRD analysis indicated that even after 50 min MA and MCA, constituent phases of chalcopyrite, Fe and Fe2O3 could be detectable beside the newly formed bornite. Regarding the peak broadening and peak intensity reduction, MCA generally intensified the microstructural changes of chalcopyrite in comparison with MA. The microstructural study performed by the Rietveld method also proved that all microstructural parameters changed in favor of reactivity, such that the amorphization degree and microstrain were increased to 96 % and 0.164 (%), respectively, while crystallite size was reduced to 14.6 nm after 50 min MCA of chalcopyrite with Fe2O3. It could be concluded from the leaching tests that MCA along with Fe and Fe2O3 addition could promote the leachability and leaching rate of chalcopyrite, as compared to MA and nonactivated chalcopyrite. Although both the MCA of chalcopyrite with Fe and Fe2O3 could enhance copper extractions in the 1 M sulfuric acid leaching tests at 80 °C, Fe addition was slightly more effective than Fe2O3. The results obtained from the kinetic study also revealed that the leaching mechanism of nonactivated chalcopyrite, mechanically activated chalcopyrite and mechanochemically activated chalcopyrite with Fe2O3 changed from diffusion control to chemical control due to MCA with Fe. Finally, the combination of kinetic and microstructural studies proved that all microstructural parameters, except for the microstrain parameters of chalcopyrite MCA with Fe2O3, could be effective in chalcopyrite reactivity promotion.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
